Silicone Esophagostomy Feeding Tubes

Silicone Esophagostomy Feeding Tubes

MILA Guardian™ Protective Foam Disk with Chlorhexidine (CHG)

MILA Guardian™ Protective Foam Disk with Chlorhexidine (CHG)

Tunneler for Length Adjustable Esophagostomy Feeding Tubes

Tunneler for Length Adjustable Esophagostomy Feeding Tubes


Esophagostomy Feeding Tube Tunneler 


Retrograde tunneling (easier and faster)

  • Greatly improves your ability to easily, safely and quickly position the MILA length adjustable Esophagostomy Feeding Tubes.
  • This technique allows the distal tip of the catheter to be manually passed through the mouth into the esophagus. 
  • The proximal end of the tube is pulled through the neck with the tunneler. 
  • Trim length and replace hub. 
  • Designed to be used with Esophagostomy tubes (Item Numbers:  E1030, E1430, E1450 and E1830). 
  • All stainless steel construction which can be reprocessed and reused.

Retrograde E Tube Placement Video



The technique is as follows:


Step 1: Disinfect and prep site according the hospital protocol.

Step 2:  Select a MILA long "length adjustable" E-tube.  The long lengths are necessary to manipulate with the tunneler.  These tubes are Item Number:  E1430; E1450; E1830; and all can be cut for desired final length.

Step 3: The size 14Fr or 18Fr is printed on the side of the tunneler.  The shorter; non-etched end; enters the mouth first to "tent" the side of the neck to palpate and incise.  The longer; dark etched end; is pushed into the feeding tube for pulling through the incision.

Step 4:  Remove the hub and skirt from the tube by unscrewing the skirt and pulling the Y adapter and skirt off.  Retain the pieces to reinstall later.

Step 5:  Trim 3-4cm off the end of the tube where it was stretched by the adapter.  This is necessary so that the tube will fit tightly and not slip off the tunneler when being pulled through.

Step 6:  Measure the length and mark the E-Tube.

Step 7: Insert E-Tube into mouth and advance until distal tip is positioned in caudal esophagus.

Step 8:  Advance short end tip of the tunneler in cranial esophagus; adjacent to E-Tube; palpate exit site and incise and dissect to create access.

Step 9: Push tunneler partially through exit site. OPTIONAL:  Grab the tip of the tunneler with a forcep to stabilize it.

Step 10: Connect proximal end of E-Tube to the long etched end of the tunneler.

Step 11: Pull the tunneler and E-Tube through exit site.  Remove the tunneler.

Step 12: Confirm placement with a radiograph; fluorography; or endoscopy.  Adjust if needed.

Step 13:  Suture and bandage according to hospital protocol.

Step 14:  Cut the tube to desired length; and replace the skirt and Y adapter.



In stock
Grouped product items
Item Number Product Description Price Qty
ETUN14 14Fr Esophagostomy Feeding Tube Tunneler
ETUN18 18Fr Esophagostomy Feeding Tube Tunneler
CatModel Use to demonstrate the placement of esophagostomy tubes with the MILA Tunneler.
E1030 10Fr ADJUSTABLE to 30in - Priming Volume=2.5ml/30in.
E1413 14Fr ADJUSTABLE to 13in - Priming Volume=3ml/13in.
E1430 14Fr ADJUSTABLE to 30in - Priming Volume=7ml/30in.
E1450 14Fr ADJUSTABLE to 50in with stylet - Priming Volume=11ml/50in.
E1830 18Fr ADJUSTABLE to 30in - Priming Volume=10ml/30in.
DR7 MILA Guardian™ Protective Foam Disk with Chlorhexidine (CHG)